/* mock_stm32.h — 测试桩: 含所有非 stm32f10x 的类型和桩 */
#ifndef MOCK_STM32_H
#define MOCK_STM32_H

#include <stdint.h>
#include <stddef.h>

/* OS 桩 */
typedef struct { int d; } OS_TCB;
typedef uint8_t  CPU_CHAR;
typedef uint32_t CPU_STK;
typedef uint32_t CPU_STK_SIZE;
typedef uint8_t  OS_MSG_QTY;
typedef uint32_t OS_TICK;
#define OS_OPT_TASK_STK_CHK  0x0001
#define OS_OPT_TASK_STK_CLR  0x0002
#define OS_OPT_TIME_DLY      0x0000

typedef struct { int d; } OS_ERR;
static void OSTimeDlyHMSM(int h,int m,int s,int ms,int o,OS_ERR*e){ (void)h;(void)m;(void)s;(void)ms;(void)o;(void)e; }

/* GD32 外设桩 */
#define rcu_periph_clock_enable(x) (void)(x)
#define gpio_init(p,m,s,pin) (void)(p),(void)(m),(void)(s),(void)(pin)
#define gpio_exti_source_select(port, pin) (void)(port),(void)(pin)
#define exti_deinit() do{}while(0)
#define exti_init(l,m,t) (void)(l),(void)(m),(void)(t)
#define exti_interrupt_enable(l) (void)(l)
#define exti_interrupt_flag_clear(l) (void)(l)
#define nvic_irq_enable(i,p,s) (void)(i),(void)(p),(void)(s)

#define RCU_GPIOA  0
#define RCU_GPIOB  1
#define RCU_AF     2
#define RCU_ADC0   3
#define GPIO_MODE_IN_FLOATING 0
#define GPIO_MODE_OUT_PP      0
#define GPIO_MODE_IPU         0
#define GPIO_MODE_AIN         0
#define GPIO_OSPEED_2MHZ      0
#define EXTI_INTERRUPT        0
#define EXTI_TRIG_FALLING     0

/* ADC 桩 */
#define adc_deinit(p) (void)(p)
#define adc_enable(p) (void)(p)
#define adc_calibration_enable(p) (void)(p)
#define adc_software_trigger_enable(p,c) (void)(p),(void)(c)
#define adc_channel_length_config(p,c,n) (void)(p),(void)(c),(void)(n)
#define adc_regular_channel_config(p,r,ch,t) (void)(p),(void)(r),(void)(ch),(void)(t)
#define adc_external_trigger_source_config(p,c,t) (void)(p),(void)(c),(void)(t)
#define adc_data_alignment_config(p,a) (void)(p),(void)(a)
#define adc_resolution_config(p,r) (void)(p),(void)(r)
static int adc_flag_get(int p, int f) { (void)p; (void)f; return 0; }
static int adc_regular_data_read(int p) { (void)p; return 2047; }
#define ADC_REGULAR_CHANNEL  0
#define ADC_SAMPLETIME_239POINT5 0
#define ADC_EXTTRIG_REGULAR_NONE 0
#define ADC_DATAALIGN_RIGHT  0
#define ADC_RESOLUTION_12B   0
#define ADC_FLAG_EOC         0

/* board_config 字段桩 */
#define BQ_INT_PORT       ((void*)0)
#define BQ_INT_PIN        0x0002
#define BQ_INT_EXTI_LINE  1
#define BQ_INT_EXTI_IRQn  1
#define NTC_ADC_PORT      ((void*)0)
#define NTC_ADC_PIN       0x0008
#define NTC_ADC_PERIPH    0
#define NTC_ADC_CHANNEL   3
#define CHARGE_TASK_PRIO  5
#define ADC_TASK_PRIO     4
#define CHARGE_TASK_PERIOD_MS    200
#define CHARGE_TASK_STACK_SIZE   1024
#define ADC_TASK_STACK_SIZE      512
#define WD_RESET_PERIOD_MS       10000

#define BQ_STAT1_READ()  1
#define BQ_STAT2_READ()  1
#define BQ_PG_READ()     1
#define BQ_CE_HIGH()     do{}while(0)
#define BQ_CE_LOW()      do{}while(0)

/* 全局变量 */
static OS_TCB ChargeTaskTCB, AdcTaskTCB;
static CPU_STK ChargeTaskStk[1024], AdcTaskStk[512];

/* I2C mock 接口 */
extern uint8_t  __mock_soft_i2c_read_reg(uint8_t dev, uint8_t reg);
extern uint8_t  __mock_soft_i2c_write_reg(uint8_t dev, uint8_t reg, uint8_t val);
extern uint16_t __mock_soft_i2c_read_reg16(uint8_t dev, uint8_t reg);
extern uint8_t  __mock_soft_i2c_write_reg16(uint8_t dev, uint8_t reg, uint16_t val);
extern void     mock_i2c_set_reg(uint8_t reg, uint8_t val);
extern void     mock_i2c_set_reg16(uint8_t reg, uint16_t val);
extern uint8_t  mock_regs_get_8(uint8_t reg);
extern uint16_t mock_regs_get_16(uint8_t reg);
extern void     mock_i2c_reset(void);

/* 重定向 I2C */
#define SoftI2C_ReadReg(d, r)       __mock_soft_i2c_read_reg(d, r)
#define SoftI2C_WriteReg(d, r, v)   __mock_soft_i2c_write_reg(d, r, v)
#define SoftI2C_ReadReg16(d, r)     __mock_soft_i2c_read_reg16(d, r)
#define SoftI2C_WriteReg16(d, r, v) __mock_soft_i2c_write_reg16(d, r, v)

extern int BQ25756_AI4_Init(void);

#ifndef __NOP
#define __NOP() do{}while(0)
#endif

#endif