# STR71X OpenOCD configuration for FreeModbus
#
# Copyright (C) 2006 Christian Walter <wolti@sil.at>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
# $Id: str71x_wig.cfg,v 1.1 2006/11/02 23:14:44 wolti Exp $
#

#daemon configuration
telnet_port 4444
gdb_port 3333

#interface
interface parport
parport_port 0
parport_cable wiggler
jtag_speed 0
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst 

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe

#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi
run_and_halt_time 0 30

working_area str71x 0x2000F000 0x00001000 nobackup
#flash configuration
flash bank str7x 0x40000000 0x00040000 0 0 STR71x 0
flash bank str7x 0x400C0000 0x00004000 0 0 STR71x 0