#include <p24fxxxx.h>

_CONFIG1(	JTAGEN_OFF & 	//JTAG port is disabled
			GCP_OFF & 		//GSP Memory Code Protection OFF
			GWRP_OFF & 		//GCC Flash Write Protection OFF
			COE_OFF & 		//
			FWDTEN_OFF & 	//Watchdog Timer OFF
			ICS_PGx1) 		//debug over PGD1 and PGC1
	
_CONFIG2(	FNOSC_FRCPLL & 	//Internal FRC with PLL
			OSCIOFNC_ON &	//RA3 is clk out (fosc/2)
			POSCMOD_NONE & 	//Primary oscillator disabled
			I2C1SEL_PRI)    //Use default SCL1/SDA1 pins


#pragma code

int main(void)
{
   unsigned long i;         //a 32 bit variable to use as a timer
 
   CLKDIVbits.RCDIV0=0;     //clock divider to 0
   AD1PCFG = 0xFFFF;        // Default all pins to digital
   OSCCONbits.SOSCEN=0;     //Disables the secondary oscilator

   TRISAbits.TRISA1 = 0;    //sets the Mode LED pin RA1 as output
   LATAbits.LATA1 = 0;      //turns LED off
	
//////////////////////////////////////////////////////////////////
///FOREVER LOOP///////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////
    while(1)
    {
      LATAbits.LATA1 = ~LATAbits.LATA1; //toggles the MODE LED
      i =0xFFFFF;                       //sets i to 1048575
      while (i--);                      //delay function
    }                                   //decrements i until 0   
}