#ifndef MAGNETICSENSORSPI_LIB_H
#define MAGNETICSENSORSPI_LIB_H


#include "Arduino.h"
#include <SPI.h>
#include "../common/base_classes/Sensor.h"
#include "../common/foc_utils.h"
#include "../common/time_utils.h"

#define DEF_ANGLE_REGISTER 0x3FFF

struct MagneticSensorSPIConfig_s  {
  int spi_mode;
  long clock_speed;
  int bit_resolution;
  int angle_register;
  int data_start_bit;
  int command_rw_bit;
  int command_parity_bit;
};
// typical configuration structures
extern MagneticSensorSPIConfig_s AS5147_SPI,AS5048_SPI,AS5047_SPI, MA730_SPI;

class MagneticSensorSPI: public Sensor{
 public:
    /**
     *  MagneticSensorSPI class constructor
     * @param cs  SPI chip select pin 
     * @param bit_resolution   sensor resolution bit number
     * @param angle_register  (optional) angle read register - default 0x3FFF
     * @param clock_speed  (optional) SPI clock speed
     */
    MagneticSensorSPI(int cs, int bit_resolution, int angle_register = 0, long clock_speed = NOT_SET);

     /**
     *  MagneticSensorSPI class constructor
    /**
     *  MagneticSensorSPI class constructor
     * @param config   SPI config
     * @param cs  SPI chip select pin
     * @param clock_speed  (optional) SPI clock speed
     */
    MagneticSensorSPI(MagneticSensorSPIConfig_s config, int cs, long clock_speed = NOT_SET);

    /** sensor initialise pins */
    void init(SPIClass* _spi = &SPI);

    // implementation of abstract functions of the Sensor class
    /** get current angle (rad) */
    float getSensorAngle() override;

    // returns the spi mode (phase/polarity of read/writes) i.e one of SPI_MODE0 | SPI_MODE1 | SPI_MODE2 | SPI_MODE3
    int spi_mode;
    
    /* returns the speed of the SPI clock signal */
    long clock_speed;
    

  private:
    float cpr; //!< Maximum range of the magnetic sensor
    // spi variables
    int angle_register; //!< SPI angle register to read
    int chip_select_pin; //!< SPI chip select pin
	  SPISettings settings; //!< SPI settings variable
    // spi functions
    /** Stop SPI communication */
    void close(); 
    /** Read one SPI register value */
    word read(word angle_register);
    /** Calculate parity value  */
    byte spiCalcEvenParity(word value);

    /**
     * Function getting current angle register value
     * it uses angle_register variable
     */
    int getRawCount();
    
    int bit_resolution; //!< the number of bites of angle data
    int command_parity_bit; //!< the bit where parity flag is stored in command
    int command_rw_bit; //!< the bit where read/write flag is stored in command
    int data_start_bit; //!< the the position of first bit

    SPIClass* spi;
};


#endif